KERN SHOREMITTARI, ANALOGINEN HB

• Typical application: measurement of penetration (Shore) • Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances • Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material • Shore D plastics, formica, epoxides, plexiglass etc. • Shore A0 foam, sponge etc. • Max mode: Holds the maximum value in the display • Point mode: Shows one instant value • Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D) • Delivered in a wooden carrying casehardness comparison plates see SAUTER AHBA-01 and SAUTER AHBD-01